Hello I picked up a Mini-VCI J2534 cable off ebay and had a heck of a time geting the driver to install to work for Techstream 11 so I thought I would share.
1). plug in cable let windows 10 install the drivers for the FTD driver if it does not auto install open up the device manager and select the device and have windows search for the driver on the internet. It will download the Microsoft driver which seems to work under win10 the provided driver does not seem to work right.
2). Install Techstreem v11 if you have not already
3). Using the command prompt unpack the MVCI Driver for TOYOTA.msi to a temp folder, dos command: 'msiexec /a 'C:tempMVCI Driver for TOYOTA.msi' /qb TARGETDIR=c:tempmvci'
4). Now create the folder:'C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS'
5). copy all the files from c:tempmvci to the directory you just made above. (if your virus software flags the update tool that is OK let it quality/delete it
6). Now the trick is to get techstream to let you select the MVCI cable you need to modify the registry to see the MVCI32.dll you copied to the directly in step 4. see reg file to edit it.
7). After this now you can launch Techstrem and under setup you can now select the MVCI interface.
Hope that helps some folks out, if so please give thanks and rep.
1). plug in cable let windows 10 install the drivers for the FTD driver if it does not auto install open up the device manager and select the device and have windows search for the driver on the internet. It will download the Microsoft driver which seems to work under win10 the provided driver does not seem to work right.
2). Install Techstreem v11 if you have not already
3). Using the command prompt unpack the MVCI Driver for TOYOTA.msi to a temp folder, dos command: 'msiexec /a 'C:tempMVCI Driver for TOYOTA.msi' /qb TARGETDIR=c:tempmvci'
4). Now create the folder:'C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS'
5). copy all the files from c:tempmvci to the directory you just made above. (if your virus software flags the update tool that is OK let it quality/delete it
6). Now the trick is to get techstream to let you select the MVCI cable you need to modify the registry to see the MVCI32.dll you copied to the directly in step 4. see reg file to edit it.
7). After this now you can launch Techstrem and under setup you can now select the MVCI interface.
Hope that helps some folks out, if so please give thanks and rep.
mvci-x64.rar
619 bytes
The steps are as follows. Create the folder C:Program Files (x86)XHorse ElectronicsMVCI Driver for Toyota TIS. Open the file MVCI Driver for TOYOTA.msi with 7zip and extract to the folder you created. Browse to the folder with Windows Explorer. 2018-10-05 15:22. Upload and store files from any folder on your computer, camera, and SD cards in the cloud. You can find your content on any phone, tablet, or computer using Google Drive, and your photos and videos in Google Photos. Jun 11, 2020 Windows 10 has a few more challenges. You need at least Techstream 12 (you could hack about with the registry to get Techstream 10 to work, nit don't waste your time). And you need to get Windows 10 to load 64 bit drivers for the cable. Windows 10 really doesn't want to let you load old, unsigned drivers. You can do it, but it'll make it hard.
Thanks given by:RiyadhFriah , Damex33 , BMWcare , Docker , amaflo , mabuhamdy , Rally , djvs , Robbert , Haknabus , tomitaauto , zuppe9000 , revitech , ivanickii , Bailey , whoami , newyoga39 , herfemp , snball60 , jeermy , romek7 , Ricky_25
Techstream definitely works with the Microsoft Windows 10 (x64) operating system. Here are easy directions for newbies to install/setup Techstream on Windows 10 64 bit for VXDIAG VCX NANO Toyota.
Questions and answers… here you go.
Q: I am trying to download a version of Techstream to my Windows 10, 64 bit computer, so I may use my new VCX Nano to diagnose my car issue- won’t start after 6 weeks sitting dormant.
A: Techstream has been compatible with 64 bit OSes for a while, so I don’t think that is your problem.
However, the driver for VxDaig Nano (which is what I think you meant) is not a 64 bit driver, so you will need to go back the sellers of VxDaig and seek their support to load it on a 64-bit system.
Xhorse Mvci Driver Windows 10 2
The other option, find a cheap laptop on eBay or CL with Win 7 and follow the VxDaig Nano instructions and it will load right up.
Q: What version of Techstream is compatible with the 2nd gen? Will v12 work?
A: I had 12.xx.024 for a bit but it was minus several menus needed for better diagnostics:(.
The guy I share the Prolong setup with used the version 12 software on his 2007, so it’ll work on a Gen2 ;).
Xhorse Firmware Update Tool Mvci
Reloaded 10.30.029 and it works well(y).
![Windows Windows](https://carecuprogrammer.files.wordpress.com/2015/07/mini-vci-toyota-techstream-v10-10-018-2.jpg)
Q: Can you post the instructions or a good link for installation on win 10?
A: This link describes the installation process, possibly with link to the software.
http://blog.obdexpress.co.uk/2017/01/24/install-mini-vci-with-techstream-v10-on-64bit-computer/
http://blog.obdexpress.co.uk/2017/01/24/install-mini-vci-with-techstream-v10-on-64bit-computer/
I think the first requirement is that your mini VCI cable hardware is capable of 32 and 64 bit, I think some of the earlier cables may be 32-bit (XP) only. If capable of 64-bit, then they give you a small CD with some special files “XHorse” and it takes a little bravery to mess with your Registry etc.
Btw, Many people will not be able to follow the instructions to install the necessary cominents. No judgement here, it is just reality.
Which is why I up telling people to stick with using an XP laptop instead.
That would be great if you have an XP laptop (or desktop) available…it is definitely a much easier install. But going forward I presume that’ll be harder to find. I thought the Win10 instructions were a little confusing but I worked thru it.
Q: How to install Techstream v10 on Windows 64 bit?
A: Quick note on techstream 10.x with windows 7 or greater x64 with the 1.4.1 (and possibly the 2.0.1) Mini VCI cable. I was having absolute fits trying to get the driver recognized. Turns out the cable was being recognized as a Broadcom Bluetooth 3.0 Chip. If you select that device, Select Update driver, Select Let me Pick From a list of device drivers on my computer (letting windows scan a specific location doesnt work), then click have disk and browse to the location of your MCVI drivers (Should be C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS) and go to the ftdibus directory and select the ftdibus.inf file. This will get the correct drivers in place for the bus. The COM drivers will install automatically after you get the bus driver in place.
Jun 08, 2020 The Matrix Path of Neo PC Game 2005 Overview. The Matrix Path of Neo is developed by Shiny Entertainment and is published under the banner of Atari. This game was released on 7 th November 2005. It is the third edition The Matrix series. Matrix path of neo pc download. Feb 22, 2019 Download and extract TheMatrixPathofNeoWinFilesEN.7z; Run “Matrix Path Of Neo.exe” and the game should now launch. (Note: when I launched the game, it took around 5 minutes for the game to start, just to make you aware) Enjoy! PlayStation 2 (2005) TheMatrixPathofNeoPS2ISOENUSA.7z (1.97GB) Additional files, patches and fixes. The Matrix: Path of Neo, like the character Neo himself, breaks the vicious cycle, and provides for an entertaining experience, if not resoundingly so. The Matrix: Path of Neo, like the title implies, places you in the shoes of Neo, closely following the events of the movie.You'll participate in all the major fights, from squaring off with Morpheus in a virtual dojo to fending off 100's of Mr.
Hopefully the search engines pick this up and it is helpful for someone else.
Q: Tips needed for Windows 10.
A: anyone wanting to try this, use a laptop of computer (or virtual machine) that you have zero personal information on and you do not banking or commerce with.
#1 top attack vector (phishing, malware, spyware…etc) is from these kinds of unauthorized downloads.
Techstream is a paid-for item from Toyota. any pirated copies, wow rolling the dice there…. Adobe premiere pro cs6 portable.
go ahead and use it but on a laptop that is disposable and you do zero personal or private work with
source: this is what I do for a living (everything and anything in the CISSP)
Q: Does anyone have answers and easy directions for computer dummies?
Xhorse Mvci Driver Windows 10 7
A: TIS Techstream V10 Setup Instruction ( !!! for 64 bit system !!! ) :
- copy “Program Files (x86) “folder to drive C: , tick “replace all current items “
- plug the Mini VCI cable into USB
- Open the Device Manager and locate two failing devices in the list. Both will appear with yellow icon (usually under “Other”), indicating that Windows failed to install drivers for them. Now, right click each failing device, select Install Driver, then “Browse my Computer”and locate to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”(enable the “include subfolders”flag). Click “Next”and wait until drivers are installed.
You should now see two new devices: “Universal Serial Bus ControllersUSB Serial Converte”and “Ports (COM & LPT)USB Serial Port (COMx)”.
- Run the FirmwareUpdateTool.exe from the “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”. Click “Device Info”, You should see the “Device connected”screen.
- Now install Techstream software using “Techstream_Setup_V10.10.018.exe” on our software CD
- Software Registration: copy the two *.ini files in “Registration”folder to “C:Program Files (x86)Toyota DiagnosticsTechstreamEnv
* Attention: It’s C:Program Files (x86) not C:Program Files , BIG DIFFERENCE !!!
- Registry Hack: Run the mvci-64bit.reg file to modify the registry for Techstream to recognize MINI-VCI under Windows x64
- Run Techstream software. Go to Setup | VIM Select menu and select the “XHorse – MVCI”
- Connect Mini VCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle”in Techstream. Wait. Then wait again. If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.
![Xhorse mvci driver windows 10 free Xhorse mvci driver windows 10 free](https://image.made-in-china.com/202f0j00wORQTrPLHekv/Newest-V10-00-028-Xhorse-Mvci-3-in-1-Highly-Recommended.jpg)
There there tommy orange pdf. * Important Note:
- DO NOT change the “User Type”when you will run your TIS Techstream for 1st time! LEAVE IT with the Default option! “Official”Dealer/Repairer with other words…
- in [ VIM Select ] option, please select the [ Xhorse – MVCI ], not [ TIS Techstream VIM ]
- If you get the following reminder while using the program:
—————————————————————-
Register Techstream Software (S314-03)
Network connection is unavailable. A network connection is required to use Techstream software.
You can only connect 29 more times without a network connection before software registration is required.
————————————————————--
You can reset that as following steps:
Go to C:Program FilesToyota DiagnosticsTechstreamEnv and find “IT3usercustom.ini”file and look for “Connectioncount=1″or what ever number of times you tried and just delete “connectioncount=1”. Click save and you should be reseted back to 30